1366x768 på lcd tv med laptop

Hårdvara och Linux.
Post Reply
whitesox
Posts: 50
Joined: 12 April 2006, 16:38

1366x768 på lcd tv med laptop

Post by whitesox » 15 January 2008, 18:52

När jag kopplar in min laptop till tv'n (DVI->HDMI) så går det bara att köra 1280x720, men vill köra 1366x768. Antar att man ska ändra i xorg.conf.. Men hur?

User avatar
_Martin
Posts: 175
Joined: 4 February 2004, 15:19
Location: Stockholm
Contact:

Post by _Martin » 16 January 2008, 21:14

Är du helt hundra på att din teve klarar den upplösning du vill använda?? Vissa teveapparater är lite "iffy" på den detaljen.

whitesox
Posts: 50
Joined: 12 April 2006, 16:38

Post by whitesox » 16 January 2008, 22:16

Det ska den göra, det är en samsung LE32R72.. grejen är ju att de upplösningar som finns att välja på funkar ju inte bra.. ser ju bara en del av skärmbilden..

jolles
Posts: 350
Joined: 29 February 2004, 11:36

Post by jolles » 18 January 2008, 12:22

Har själv en lcd-panel med samma upplösning, men ja kör 1024x768 på min, kan verkligen inte klaga.. iomed att min laptop använder samma upplösning så e de ju smidigt :-)

tror du borde kunna ändra till typ,

Code: Select all

Subsection "Display"
        Depth       24
        Modes       "laptoppens upplösning" "1024x768"
        ViewPort    0 0
    EndSubsection
Tror att jag har testat med 1366, men testa du med så märker du. Detta är ifall du använder vga-utgången och inte vanlig tv-out.
Våga Vägra Windows
_________________
Öppen sås ftw!

whitesox
Posts: 50
Joined: 12 April 2006, 16:38

Post by whitesox » 18 January 2008, 19:27

Får det inte att fungera.. nu ser min xorg.conf ut så här..

Code: Select all

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:30:30 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

        # Uncomment if you have a wacom tablet
        #       InputDevice     "stylus"        "SendCoreEvents"
        #       InputDevice     "cursor"        "SendCoreEvents"
        #       InputDevice     "eraser"        "SendCoreEvents"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "ServerFlags"

# Removed Option "Xinerama" "1"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "se"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Generic Monitor"
    HorizSync       28.0 - 64.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CMO"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "SAMSUNG"
    HorizSync       15.0 - 46.0
    VertRefresh     50.0 - 61.0
EndSection

Section "Device"
    Identifier     "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
    Driver         "nvidia"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    BusID          "PCI:4:0:0"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce Go 7300"
EndSection

Section "Device"
    Identifier     "Videocard1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce Go 7300"
    BusID          "PCI:4:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
    Monitor        "Generic Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Modes      "1280x800"
    EndSubSection
EndSection

Section "Screen"

# Removed Option "TwinView" "0"
# Removed Option "metamodes" "DFP-0: 1280x800 +0+0"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "metamodes" "DFP-0: 1280x800 +0+0, DFP-1: nvidia-auto-select +0+0"
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Videocard1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: 1280x800 +0+0"
EndSection

Post Reply